This chapter describes Bandwidth Reservation System (BRS) messages. For information on message content and how to use the message, refer to the Introduction.
| BRS.001 |
Level: C_INFO
Short Syntax: BRS.001 pkt iob prot/filt msg prot/filt type size size queued in class class name prio priority nt interface number int network ID
Long Syntax: BRS.001 packet with Id iob for protocol/filter msg prot/filt type size size placed in class class name at priority priority network interface number int network ID
Description: A packet is placed in the class at a priority based on its protocol/filter.
| BRS.002 |
Level: C_INFO
Short Syntax: BRS.002 pkt of prot msg prot type size size is disc'ed by overflow nt interface number int network ID
Long Syntax: BRS.002 a packet of protocol msg prot type size size is discarded because of queue overflow network interface number int network ID
Description: Notifies on all packet overflows
| BRS.003 |
Level: C_INFO
Short Syntax: BRS.003 zero length pkt of prot msg prot type is disc'ed nt interface number int network ID
Long Syntax: BRS.003 a zero length packet of protocol msg prot type is discarded network interface number int network ID
Description: msg when zero length pkts are dumped
| BRS.004 |
Level: C_INFO
Short Syntax: BRS.004 pkt iob prot/filt protocol or filter name size size xmit from class class name nt interface number int network ID
Long Syntax: BRS.004 packet with Id iob for prot or filter protocol or filter name size size is transmitted from class class name network interface number int network ID
Description: A packet is placed from handler struct to driver queue for xmit.
| BRS.005 |
Level: C_INFO
Short Syntax: BRS.005 Lost prior other items affected mappings of prot or filt for nt interface number int network ID
Long Syntax: BRS.005 Lost priority other items affected mappings of prot or filt for network interface number int network ID
Description: The configuration record for protocol or filter mappings is not present in SRAM. Default mappings have been assumed.
Cause: Either the original configuration record for protocol or filter mappings is not supported by this level of software or configuration memory has been corrupted.
Action: Either reconfigure the mappings or use the configuration tool upgrade facility when the original configuration record is not supported by the current level of software. Contact customer service if configuration memory has been corrupted.
| BRS.006 |
Level: C_INFO
Short Syntax: BRS.006 No memory to create BRS structure. BRS not enabled on nt other items affected int interface number
Long Syntax: BRS.006 No memory to create BRS structure. BRS not enabled on network other items affected int interface number
Description: BRS encountered memory allocation error in attempt to allocate storage required for BRS operation.
Cause: Out of memory
Action: Contact customer service.
| BRS.008 |
Level: C_INFO
Short Syntax: BRS.008 pkt iob prot/filt protocol or filter name size size intercepted by Frame Relay from class class name nt interface number int network ID
Long Syntax: BRS.008 packet with Id iob for prot or filter protocol or filter name size size intercepted by FR from class class name network interface number int network ID
Description: A packet is intercepted by Frame Relay for fragmentation.
| BRS.009 |
Level: C_INFO
Short Syntax: BRS.009 Frag fragment of total frags for prot/filt protocol/filter name size size xmit from class class name nt interface number int network ID
Long Syntax: BRS.009 Fragment fragment of total frags for prot or filter protocol/filter name size size is transmitted from class class name network interface number int network ID
Description: A Frame Relay fragment is placed from handler struct to driver queue for xmit.
| BRS.010 |
Level: C_INFO
Short Syntax: BRS.010 Interleave higher prio single seg pkt for prot/filt prot/filt type size size from class class name network interface number int network id
Long Syntax: BRS.010 Fragment sequence interrupted to send higher priority single segment packet for prot/filt prot/filt type size size from class class name network interface number int network id
Description: Interleave higher priority single segment packet from same class as current fragmentation sequence.
| BRS.011 |
Level: C_INFO
Short Syntax: BRS.011 Exit o_start
Long Syntax: BRS.011 Exit ostart
Description: Exit the ostart routine.
| BRS.012 |
Level: C_INFO
Short Syntax: BRS.012 Whole pkt size PKT size Frag fragment of total frags size size xmit from BRS to DD n_opq.nq= n_opq.nq nt interface number int network ID
Long Syntax: BRS.012 Whole Pkt Size PKT size Fragment fragment of total frags size size xmit from BRS to DD n_opq.nq= n_opq.nq network interface number int network ID
Description: A Frame Relay fragment is placed from handler struct to driver queue for xmit.
| BRS.013 |
Level: C_INFO
Short Syntax: BRS.013 Frag fragment of total frags size size xmit from BRS to DD. n_opq.nq= n_opq.nq nt interface number int network ID
Long Syntax: BRS.013 Fragment fragment of total frags size size xmit from BRS to DD. n_opq.nq= n_opq.nq network interface number int network ID
Description: A Frame Relay fragment is placed from handler struct to driver queue for xmit.
| BRS.014 |
Level: C_INFO
Short Syntax: BRS.014 cml_OSTART netp= net n_opc_inc= n_opc n_opq.nq= n_opq.nq nt interface number int network ID
Long Syntax: BRS.014 cml_Ostart netp= net n_opc_inc= n_opc n_opq.nq= n_opq.nq network interface number int network ID
Description: enter cml ostart.
| BRS.015 |
Level: C_INFO
Short Syntax: BRS.015 cml_OCMP netp= net n_opc_dec= n_opc n_opq.nq= n_opq.nq
Long Syntax: BRS.015 cml_OCMP netp= net n_opc_dec= n_opc n_opq.nq= n_opq.nq
Description: enter cml ocmp
| BRS.016 |
Level: C_INFO
Short Syntax: BRS.016 cml_OSTRTERR netp= net n_opc_dec= n_opc n_opq.nq= n_opq.nq
Long Syntax: BRS.016 cml_OSTRTERR netp= net n_opc_dec= n_opc n_opq.nq= n_opq.nq
Description: enter cml ocmp